How to Convert a Scanned Drawing to AutoCAD
AutoCAD can attach a scan as a raster image, but you can't edit a picture, snap to it or dimension it. To work on a paper drawing in AutoCAD you need it as vectors: lines, arcs and text.
AutoCAD opens DXF files directly, so the job is getting a clean DXF out of the scan, at the right size. Here's how, in about five minutes for a typical sheet.
Start with a good scan
The trace can only follow what the scan shows. Scan at 300 dpi or more, in black and white or greyscale, with the sheet flat and square to the glass. A PDF straight from the scanner is ideal. A phone photo works too if you shoot it square on, in even light.
If the drawing was exported from CAD as a PDF rather than scanned, even better: Direct trace reads its lines from the file instead of tracing pixels.
Steps
Upload the scan
Go to bevell.app/image-to-dxf and drop the file: a PDF or TIFF up to 50 MB, or a photo as PNG, JPG or WebP up to 10 MB. For a drawing set, a Page field picks the sheet once it has converted.
Keep Direct trace
A PDF or TIFF starts on Direct trace, which follows every stroke down its centre, so each line comes back as one line rather than two outlines. For a faded or messy sheet, AI redraw draws it again cleanly before tracing.
Decide about the lettering
Tick Read lettering as text for a machine-plotted sheet, and room names and notes arrive as editable text on their own TEXT layer. Leave it off for handwriting, which traces better than it reads.
Set the scale
Drag across a dimension printed on the sheet and type its value. The DXF is written in millimetres at that true size.
Open it in AutoCAD and save a DWG
In AutoCAD choose Open, set Files of type to DXF and pick the file. Then use Save As to keep it as a DWG.
Bevell does not write DWG itself. AutoCAD saves the DXF as a DWG in one step, and every other CAD package opens the DXF as it is.
Cleaning up in AutoCAD
Check a few lengths first
Measure two or three known features with DIST before you build on the drawing. If one is off, the scale was set from a misread dimension: convert again with another.
Remove doubled linework
OVERKILL deletes duplicate and overlapping lines and arcs, which a heavy or smudged stroke can leave behind.
Join what belongs together
JOIN turns lines and arcs that meet end to end into one polyline, which is easier to offset, hatch and select.
Put it on your layers
Linework arrives on one layer and read lettering on its own TEXT layer. Move objects onto your own layers before you add to the drawing.
Redo hatching rather than keeping it
Hatched areas trace as many small strokes. Delete them and apply a new HATCH, which is lighter and edits as one object.
Working in inches?
The DXF is in millimetres. SCALE it by 1/25.4 after opening if your drawing uses inches.
What you get, and what you don't
You get the drawing's geometry at true scale: walls, outlines, arcs, circles, and the lettering as text if you asked for it. Nothing is redrawn or invented in Direct trace, so what you get is what was on the paper.
You don't get a layered, constrained CAD model. Dimensions come back as lines and text, not as dimension objects, and the layers a drafter would use are yours to set. For most sheets that is still far quicker than retracing by hand.
More on the conversion itself: Scan to CAD, Blueprint to CAD and PDF to DXF.
Try it on your sheet
Unlimited free previews, no account required.
Convert a scan to DXF